Depending on the LAN segment router configuration, clients on that LAN segment may need to be reconfigured to use DHCPv6, as described in Part 4: Setting up DHCPv6 to Dynamically Issue IPv6 Addresses in a Network in the Enabling IPv6 in Microsoft Windows Application Servers article in the Infrastructure section. Disabling the DHCPv6 client on server versions is described in Part 3: IPv6 Static Addressing and DNSv6 in the Enabling IPv6 in Microsoft Windows Applicationi Servers article in the Infrastructure section. This may or may not be considered acceptable. Server versions have a DHCPv6 client enabled by default. Wi-Fi Sense (present in Windows 10 versions 1709 and prior only) should be disabled if present as described here for desktop systems and here for corporate environments. Internet Connection Sharing (ICS) is disabled by default, and should be disabled if found to be enabled on any network interface as described here. In the absence of applicable policy or guidance about hardening Windows Server to guard against potential IPv6-related attacks, a guide for configuring Windows Server versions released in 2013 or later is provided by this article.

Internet Protocol version 6 ( IPv6) is enabled by default in all versions of Microsoft Windows 8 and later, and Server and 10 Enterprise versions released in 2013 or later. Note: A 2022 tutorial on the many aspects of IPv6 can be found in this All Things TECH IPv6 in Windows article.

How to enable teredo in windows 10